If you have an issue installing SynergyCP on your server, please verify the following:
- The install is happening on a fresh Debian 11 server with nothing but SynergyCP installed.
- If stuck on the install-wizard at the end of the install, make sure that CloudFlare and other protection services are disabled on the API domain.
- There is at least 50GB of free disk space allocated to whichever partition /var/ is mounted as. This command should print out at least 50GB:
df -Ph /var/ | tail -1 | awk '{print $4}'
If this value is less than 50GB, you will need to either resize the /var partition to be larger or redo the installation and configure a custom size. -
If you get SSL certificate errors, it is likely that the system clock on the machine is wrong or the certificates are out of date. Try this command before running the install command again:
apt-get update; apt-get install -y ntp ca-certificates
-
If the installer has an error due to the presence of multiple IP addresses, use the public IP in this command and then re-run the installer:
docker swarm init --advertise-addr x.x.x.x
If you have confirmed the above issues are not occurring or have trouble fixing them, please reach out to support@synergycp.com.